Throttle / Brake Servo Mount

With the popularity of our Battery Box eliminator for the electric Baja Many of our customers that have "Shorties", and Lightened Race Bajas have been begging us to accommodate them with a Throttle / Brake Servo mount so the Battery Box Eliminator could be used on a Gas Engine Baja.

You asked, and now we have it for you. Made of high strength aluminum and extremely light (.3oz) you can now mount your throttle servo and remove your battery box. The mount uses the forward battery box mounting pin and the front roll cage mounting hole so no additional holes or modifications are needed. If you use the stock roll cage the mount slides tightly under the front roll cage mount and is pinned from the bottom just as you do now minus the plastic washer on the underside. If you are using a Team Chase cage you will secure it with a user supplied nut and bolt. The rear mounting hole will also accommodate a nut and bolt if you choose. The servo will sit in almost the exact place as the stock servo did. You will need to make minor adjustments to the linkage be it a stock or aftermarket linkage but no modifications will be needed. An additional use for this mount would be for the electric folks that would like to add front brakes. Its in a great place for you to easily adapt most brake kits to work perfectly.

• (1)   Throttle / Brake Servo Mount