FastEddy Bearings
15mm Clutch Bell Shims
15mm Clutch Bell Shims
SKU:TFE372
Couldn't load pickup availability
Shimming your clutch bell properly is an important part of properly servicing and maintaining your RC.
To much play can cause undue heat and alignment issues resulting in premature bearing failure.
This kit contains 4 shims. 2 Units .1 and 2 units .3
With these units you can mix and match them for the perfect fit. Combinations will get you the following thicknesses.
.1,.2,.3,.4,.5,.6,.7,.8mm Perfect for any clutch system needs.
For use with ALL Losi 5ive clutch bells and clutch systems. Turtle Racing clutch system for the HPI Baja
- (1) 4 shims. 2 Units .1 and 2 units .3
These shims worked perfect for shimming the bearings on front and rear diffs for Losi 5T 2.0
Losi only offers a shim for the pinion on the diff. The 15mm inside diameter of the shims are an exact match for shimming the diffs the old fashioned way.
Easy to shim clutch bell to get play out
Buying again
All pinion play gone .
The perfect shims for my application.