FastEddy Bearings
Traxxas Compatible TRX-4M 1/18 Ford Bronco Sealed Bearing Kit
Traxxas Compatible TRX-4M 1/18 Ford Bronco Sealed Bearing Kit
SKU:TFE7972
Couldn't load pickup availability
Traxxas Compatible TRX-4M 1/18 Ford Bronco Sealed Bearing Kit
- (8) 3x6x2.5
- (4) 3.5x7x2.5
- (4) 4x8x3
- (4) 5x8x2.5
- (2) 8x12x3.5
You are purchasing the bearings listed above.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
NOTE: PHOTOS ARE FOR IDENTIFICATION ONLY
Photos are for Seal / Shield / Bearing Style identification only and ARE NOT a photo of the exact bearing being ordered. Please reference the size.
Always glad to use Fast Eddy bearings in all of my builds. They also put out videos on how to do the job of putting bearings in a build that has bushings. Great company!
I have fast eddy bearings in all my rigs. They are best of the best. Never had any issues with them and a must on dumping bushing for these bearings.
I would suggest this to anyone with a TRX4m. Smoother and a great upgrade. Take your time and follow the videos online. This is not super difficult to do, just a little time consuming so get a good work station, light, and tools. I did this on 2 Broncos. Bearing tolerance was a perfect fit
My Trx runs smoother and sounds better!
All bearings fit perfect, completely changed the rig for the better. So smooth! Super fast shipping too