5th Scale RC Products

Shimming your clutch bell properly is an important part of properly servicing and maintaining your RC. To much play can cause undue heat and alignment issues resulting in premature bearing failure.This kit contains 4 shims. 2 Units .1 and 2 units .3With...

Dogbone Boot Install Tool V2 For the HD 5SC Bones.This tool makes it a breeze to install boots onto your dogbones. V2 is designed to work with the thicker HD dogbones on the HPI Baja SC with 5mm Pins. (1)    Boot install tool V2 For HD SC...

TeamFastEddy carring strap for your HPI Baja 5b. Although designed for the 5b, this strap may also work well with other large scale vehicles. Makes carrying your car a whole lot easier! Built of top quality materials with a strong rubber handle. (1)...

Team FastEddy Replacement Clutch Bearing Set for Turtle Racing Clutch System. This is a set of two (2) bearings. Works with Turtle Racing clutch system only. Turtle Racing chooses FastEddy bearings to use with all their products. Replace them with the...

Team FastEddy replacement engine bearing set. Includes 2 open crank bearings. These high quality bearings are rated at 35000+ RPM and make a great choice for repairing those worn crank bearings.Compatible replacements for PMW part # 3020Zenoah...

Team FastEddy Ceramic engine bearing set. Used by several of the top engine builders in the industry. A great value for top-notch ceramic bearings. Includes Set of two (2) open crank ceramic high performance engine bearings. 440C stainless steel bearing...

Team FastEddy, in conjunction with a leading USA-based grease manufacturer has developed the ultimate grease for you 5th scale needs. FastEddys Dogbone and Transmission Grease is available in a large 2 oz jar with enough grease to last a good long time...

Team FastEddy has developed a simple multi-tool for working with your dogbones on the HPI Baja AND the center shaft boots on your Losi 5ive. The primary function is to effortlessly install your boots without ripping or tearing them. Insert your dogbone...

Team FastEddy Droop Screw Bump Stops for the Losi 5ive-T Droop screws play a large part in chassis tuning on the Losi 5ive-T. The droop screws are steel and the chassis is aluminum. It doesn't take long for the screws to gouge out and trash your chassis...

Stainless steel plates that cover both the exhaust port and the intake port on your RC Gas Engine. Contamination is the largest engine killer. Its always best to cover your posts when the intake or exhaust is removes. Works great for storing engines. ...

Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...

Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...