null

5th Scale RC Products

5th Scale RC Products

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • 15mm Clutch Bell Shims

    15mm Clutch Bell Shims

    $6.99
    Shimming your clutch bell properly is an important part of properly servicing and maintaining your RC. To much play can cause undue heat and alignment issues resulting in premature bearing failure.This kit contains 4 shims. 2 Units .1 and 2 units .3With...
    Qty in Cart: 0
    Quantity:
    Price:
    $6.99
    Subtotal:
  • Boot install tool V2 For HD SC Bones

    Boot install tool V2 For HD SC Bones

    $14.99
    Dogbone Boot Install Tool V2 For the HD 5SC Bones.This tool makes it a breeze to install boots onto your dogbones. V2 is designed to work with the thicker HD dogbones on the HPI Baja SC with 5mm Pins. (1)    Boot install tool V2 For HD SC...
    Qty in Cart: 0
    Quantity:
    Price:
    $14.99
    Subtotal:
  • On Sale
    Clip-N-Carry Strap HPI Baja

    Clip-N-Carry Strap HPI Baja

    MSRP: $29.99
    Now: $16.99
    Was: $29.99
    TeamFastEddy carring strap for your HPI Baja 5b. Although designed for the 5b, this strap may also work well with other large scale vehicles. Makes carrying your car a whole lot easier! Built of top quality materials with a strong rubber handle. (1)...
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $29.99
    Now: $16.99
    Was: $29.99
    Subtotal:
  • Clutch Bearing Set For Turtle Racing Clutch System

    Clutch Bearing Set For Turtle Racing Clutch System

    $11.99
    Team FastEddy Replacement Clutch Bearing Set for Turtle Racing Clutch System. This is a set of two (2) bearings. Works with Turtle Racing clutch system only. Turtle Racing chooses FastEddy bearings to use with all their products. Replace them with the...
    Qty in Cart: 0
    Quantity:
    Price:
    $11.99
    Subtotal:
  • Crank Bearing Set CY/Zen Stainless Steel

    Crank Bearing Set CY/Zen Stainless Steel

    $14.99
    Team FastEddy replacement engine bearing set. Includes 2 open crank bearings. These high quality bearings are rated at 35000+ RPM and make a great choice for repairing those worn crank bearings.Compatible replacements for PMW part # 3020Zenoah...
    Qty in Cart: 0
    Quantity:
    Price:
    $14.99
    Subtotal:
  • Dogbone & Transmission Grease

    Dogbone & Transmission Grease

    $17.99
    Team FastEddy, in conjunction with a leading USA-based grease manufacturer has developed the ultimate grease for you 5th scale needs. FastEddys Dogbone and Transmission Grease is available in a large 2 oz jar with enough grease to last a good long time...
    Qty in Cart: 0
    Quantity:
    Price:
    $17.99
    Subtotal:
  • Dogbone and Center shaft boot Installation Tool

    Dogbone and Center shaft boot Installation Tool

    $13.99
    Team FastEddy has developed a simple multi-tool for working with your dogbones on the HPI Baja AND the center shaft boots on your Losi 5ive. The primary function is to effortlessly install your boots without ripping or tearing them. Insert your dogbone...
    Qty in Cart: 0
    Price:
    $13.99
    Subtotal:
  • Engine Port cover set (1290-TFE)

    Engine Port cover set

    $11.99
    Stainless steel plates that cover both the exhaust port and the intake port on your RC Gas Engine. Contamination is the largest engine killer. Its always best to cover your posts when the intake or exhaust is removes. Works great for storing engines. ...
    Qty in Cart: 0
    Quantity:
    Price:
    $11.99
    Subtotal:
  • Hinge Pin Shim Kit .2mm

    Hinge Pin Shim Kit .2mm

    $7.99
    Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...
    Qty in Cart: 0
    Price:
    $7.99
    Subtotal:
  • Hinge Pin Shim Kit .5mm

    Hinge Pin Shim Kit .5mm

    $7.99
    Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...
    Qty in Cart: 0
    Price:
    $7.99
    Subtotal:
  • Hinge Pin Shim Kit 1mm

    Hinge Pin Shim Kit 1mm

    $7.99
    Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...
    Qty in Cart: 0
    Quantity:
    Price:
    $7.99
    Subtotal:
  • Losi 5ive-T Clutch Bearing Set

    Losi 5ive-T Clutch Bearing Set

    $13.99
    Team Fast Eddy Replacement clutch bearings for the Losi 5ive-TClutch bearings are usually the first to go on any RC. Pick up a set or two for your tool box.Set of (2) High quality clutch bearings. (1)   Losi 5ive-T Clutch Bearing Set
    Qty in Cart: 0
    Quantity:
    Price:
    $13.99
    Subtotal:
  • Total: items /

Adding your products to cart